NEWS

You are here: Home > NEWS

Corporate news-Welcome Mr Mohammad Mahmoud to our company for business negotiation
2018-12-17

Corporate news-Welcome Mr Mohammad Mahmoud to our company for business negotiation

On December 7th, Mr. Mohammad Mahmoud from Egypt came to our company to discuss the business of the lid of themetal can. During this period, Mr. Mohammad Mahmoud visited the plastic cap production department of our company accompanied by General Man…

Introduction of sterilization methods for plastic bottle caps
2018-11-29

Introduction of sterilization methods for plastic bottle caps

In the process of using plastic bottles, the hygiene problems of plastic bottles are of great concern to us, especially the attention of the bottle caps. Because the cap is often in direct contact with our mouth when drinking, if there is something d…

The method of removing odor on a plastic cap&closure
2018-11-29

The method of removing odor on a plastic cap&closure

1, use lemonade.2. Milk deodorizing method: soak the plastic cover with milk and wash it in about a minute.3, orange peel to taste method: cover the cap with orange peel and put it for about 3 to 4 hours.4, boiled vinegar, stirring, boiling water for…

Irreplaceable plastic handle
2018-11-29

Irreplaceable plastic handle

In the production activities of human beings, in order to be convenient, they will give full play to their creativity, such as the invention of papermaking and printing. Now, a new convenient tool has been invented. Although the invention of plastic…

Two types of molecular structures of plastic handles
2018-11-29

Two types of molecular structures of plastic handles

The first type is a linear structure, and a polymer compound having such a structure is called a linear polymer compound; The second type is a bulk structure, and a polymer compound having such a structure is collectively referred to as a bulk polyme…

Introduction to heat treatment of plastic cap injection molds
2018-11-29

Introduction to heat treatment of plastic cap injection molds

Heat treatment of plastic cap injection mold is a very important process. Generally, the plastic cap injection mold will be quenched and tempered before finishing, and then directly processed after being cold-processed, which not only ensures the use…

Why is the milk powder packaged in metal tin cans?
2018-10-24

Why is the milk powder packaged in metal tin cans?

On the one hand, Canned milk powder has a long storage time.Because canned milk powder lasts longer than bagged milk powder. The shelf life of canned milk powder is generally 2 to 3 years. This is because canned milk powder is generally filled with n…

The advantages of stainless steel cans
2018-10-24

The advantages of stainless steel cans

The stainless steel cans are designed strictly enough to effectively prevent mosquitoes from invading and to ensure that the water quality will not be affected by the external environment. It is a kind of stainless steel cans which can ensure the app…

About stainless steel can anti-corrosion treatment measures
2018-10-24

About stainless steel can anti-corrosion treatment measures

Stainless steel cans will inevitably use corrosive media during application. In the application, most of these products will cause corrosion. What we need to do in daily life is to ensure the anti-corrosion work of the surface. In place, the only way…

Introduction of plastic handle material composition
2018-10-24

Introduction of plastic handle material composition

The main component of plastic handle is synthetic resin. Resin accounts for about 40% to 100% of the total weight of the plastic handle. The basic properties of plastic handle are mainly determined by the nature of the resin, but additives also play …

Aluminum cap has more advantages than plastic cap
2018-10-24

Aluminum cap has more advantages than plastic cap

The combined anti-counterfeit plastic bottle cap has a complex structure and anti-backflow function. The surface treatment process is various, the stereoscopic effect is strong, and the appearance is unique and novel, but some inherent defects cannot…

The introduction of plastic Injection molding
2018-10-24

The introduction of plastic Injection molding

Process cost: high mold cost and low cost per piece.Typical products: plastic bottles, plastic cap, plastic closure, plastic handle, plastic cover, plastic pump, etc.Suitable for production: only suitable for mass production.Quality: Extremely high s…

How to improve the manufacturing process of plastic handle grips
2018-10-23

How to improve the manufacturing process of plastic handle grips

Changing the surface shape of the plastic bottle, such as the middle of the plastic bottle is relatively thin, increasing the circumferential groove or rib of the surface of the plastic bottle, which can improve the rigidity and bending resistance of…

Process and development trend of plastic bottle caps
2018-10-23

Process and development trend of plastic bottle caps

Any technology has its own bottleneck, and the cap industry is no exception. Art analyzes and contrasts this issue. The so-called cavity filling imbalance means that the speed of molten plastic entering each mold cavity is inconsistent. In the inject…

Description of the influence of plastic cap material on the injection mold
2018-10-23

Description of the influence of plastic cap material on the injection mold

We all know that plastic injection molds are all about a single product. Different plastic products, the plastic injection molds it develops will be different. Sometimes even the same plastic products use different requirements, so the plastic inject…

The features of plastic cap injection mold
2018-10-23

The features of plastic cap injection mold

(1) Multi-cavity point: there are mature technologies from 4 cavity to 32 cavity, and the simplified hot runner works with low reliability.(2)High efficiency: the use of simplified dispensing hot runner, no glue waste, the cycle reaches 5 seconds.(3)…

Plastic Anti-Theft Cap
2018-10-23

Plastic Anti-Theft Cap

Plastic anti-theft caps are the common packaging forms of bottle packaging, especially in the beverage field. According to their use, they can be divided into carbonated beverage caps and non-gas beverage caps. Generally, polyolefin is used as the ma…

Two production processes for plastic caps&closure
2018-10-23

Two production processes for plastic caps&closure

On the one hand, the production process of compression molding:The suction machine sucks the mixed material into the barrel of the compression molding machine, and after heating to the semi-melt plasticizing state in the barrel, quantitatively extrud…

How to improve the manufacturing process of plastic handle
2018-10-23

How to improve the manufacturing process of plastic handle

First of all, change the surface shape of the plastic bottle, such as the middle of the plastic bottle is relatively thin, increase the circumferential groove or convex rib of the surface of the plastic bottle, can improve the rigidity and bending re…

Analysis of a wide range of plastic handle
2018-10-23

Analysis of a wide range of plastic handle

There are many types of plastic hand-held buckles, which can be divided into different types according to different purposes. The plastic bottles on the milk box are different from the plastic bottles on the edible oil. Mainly based on the design of …